An Unrivalled 5000 PSI Of Pressure Washing Power

Block Paving

Drive,Path and Patio Cleaning FAQs

1. WHY HAVE THE SURFACE SEALED?
Sealing will restore and enhance the original colour of the surface. It will also provide extra protection against the elements and give a longer lasting finish.

2. WILL THERE BE ANY DISTRUPTION?
While work is being carried out, there will be an absolute minimum of disruption. After each stage, our engineers will always leave the site clean and tidy.

3. HOW LONG WILL IT TAKE?
Depending on the size of the area and amount of staining and dirt build up - most drives, paths patios or forecourts will be cleaned within one day.

4. CAN STAINS BE REMOVED?
Mould, mildew, algae, paint, mortar and even oil stains can often be completely removed. Our engineers will advise on individual stains as age and the porosity of the surface can have an affect. 

5. WHAT PROCESSES ARE INVOLVED?
There are several clean and efficient stages of work: 
        Stage 1 - Repair any damaged areas.
        Stage 2 - Clean surface removing algae, dirt, weed growth and most stains.
       Stage 3 - Re-sand
      Stage 4 - Apply appropriate sand stabiliser or surface sealer.

6. WILL I HAVE TO STAY OFF THE SURFACE AFTER CLEANING?
After cleaning - no. To allow a sealed area to cure we recommend foot traffic to be allowed only 3-4 hours and vehicular traffic after at least 24 hours.

7. WHAT ABOUT RE-SANDING AND STABILISING?
This can only take place once the area is completely dry. Weather permitting - usually 24 to 48 hours after cleaning. Again, this stage should be finished within one day.

8. WHAT ABOUT WEED PREVENTION?
The application of the stabiliser/sealant helps prevent the jointing sand washing out and gives additional protection against weeds.


9. HOW WILL I BENEFIT FROM THIS?
We will restore your investment to its former glory and provide an efficient, reliable service with full after sales care - 
Guranteed!